http://www.gzxlyq.com/
1. The drying oven on forced convection for
the first time may be a little odor or white smoke arises because this is new product, after baking for about a period
of time will automatically disappear, does not affect only the production of
the machine.
2. Drying oven on forced convection should be
based on actual usage, such as ambient temperature, air cleanliness. Product
volatile pollution, to regular maintenance, in general, not less than once a
month maintenance.
3. The top cover, place do not anything, so as not to affect the
cooling of the machine.
4. Please confirm that the blower motor and
the arrows indicate the direction of rotation is the same as drying oven on forced convection, if the opposite direction, be sure to adjust Steering is
consistent with the label, or the furnace temperature can not be properly
raised
5. Maintenance of To turn off the main power
switch isolator
6. Protection of indoor ventilation in order
to avoid adverse machine cooling, the surface temperature is too high
7. Make sure the exhaust flow chamber
8. Make sure the intake episode, such as
ambient air dusty, install an air filter
9. The method of tank cleaning outer tank
cleaning method, but cleaning is completed, should be made the oven without
heating at no load condition, the fan is running 5-10 minutes , it can be normal
use.
10. Carton proper cleaning methods, with a
soft cloth moistened with water and scrub, wash with a dry cloth to dry, if
strong attachment swag scrub not clean, can be used to gently wipe a few small
amount of detergent (avoid prolonged Wipe repeatedly) washed with water and
wiped dry.
11.When cleaning outside the box, do not use
the rigid items to clean, to avoid scratching the surface of the paint, but do
not use corrosive liquid to clean, especially dry surface of the instrument, so
as not to damage the surface brightness, indicators,
12. Check the tightness of terminals electrical parts , the
motor, relay and contactors of the solid state case, ground is solid and the
like.
13. Note Check the tightness of bolts
connecting parts, such as door locks, door spindle and so on.
