About personal safety
1. The high temperature burn
Temperature is so high.when the machine doing high‐temperature test chamber. When the test during or immediately after the test, and if you open the door to be especially careful to avoid burns. When the refrigerator work, brass exhaust temperature is high, do nottouch during operation, avoid burns.
2. The low temperature frostbite
Temperature is very low when the machine making low temperature test chamber. When the test during or immediately after the test, such as the need to open the door in need of special care to avoid frostbite.
3. Electric shock
While the device has a robust measures against electric shock, but still need to pay attention, especially when the electrical control system, under operating conditions, do not touch the electrical parts
Safety information
1. Power
The power supply of High and low temperature alternating temperature humidity test chamber using the three―phase five―wire and equipment for the four―wire cable, three‐phase line, a zero line. Please note that the zero line distinction. Due to equipment of part load and control systems are the single―phase, then the wrong zero line will cause the device to not work and damage.
The equipment grounding wire with ground column, make sure that the device is safe and reliable equipment is well grounded. Zero line, ground wrong will cause the device to non-work.
2. Site
Use process will produce a lot of heat. Please the device installed in a well―ventilated place.
Do not go near flammable materials or in explosive environments use the device
Do not use in a strong magnetic field and strong vibration environments
Do not test the power supply access equipment, as it will increase the equipment complies, unless the device leaving the test Power Interface
The equipment is energized or operating do not handling, maintenance.
